Kaabli Rikke Määraja (TDR) TX Ranger

TXRanger

New product

The TX Ranger is a hand-held Time Domain Reflectometer (cable fault locator) with a first range of 2.5 meters combined with a 1.3 Nano second pulse width gives a blind zone of only 5 cm, it makes this the ideal product for fault location on short cable assemblies and harnesses. Small and intermittent faults can be easily identified by using the selectable gain control allowing trace amplification of up to 7 times and when set to scan lock mode the advanced noise reduction software may be selected allowing the user to select between 8,16 and 32-point trace averaging further enhancing the clarity of the trace by reducing electrical and environmental interference.

  • Short Range Graphical TDR; 
  • Up to 700m; 
  • Deadzone 0.2m; 
  • Selective Gain; 
  • Trace Comparisons; 
  • USB download to PC. 

More details

Bi Communications

 

Tellimisel

859,00 € Maksudeta

0.6 kg
)

  • USB 2.0 Interface with a Windows compatible software TraceXtra to download/analyse traces
  • Rugged Palm-Top design
  • Weighs less than 350g (12oz)
  • 11 Measurement Ranges up to 6000m(6km)
  • 25, 50, 75 & 100ohm Selectable Cable Impedance
  • Memory capacity upto 50 saved traces
  • Built in Tone Generator for Pair Tracing and Identification
  • Suitable for testing all Communication and Power Cables
  • Environmental Protection IP54
  • CE Approved
  • Soft bag & Test Leads

The TX Ranger is a hand-held Time Domain Reflectometer (cable fault locator) with a first range of 2.5 meters combined with a 1.3 Nano second pulse width gives a blind zone of only 5 cm, it makes this the ideal product for fault location on short cable assemblies and harnesses. Small and intermittent faults can be easily identified by using the selectable gain control allowing trace amplification of up to 7 times and when set to scan lock mode the advanced noise reduction software may be selected allowing the user to select between 8,16 and 32-point trace averaging further enhancing the clarity of the trace by reducing electrical and environmental interference.

With an onboard storage capacity of up to 50 traces including time/date, impedance, Velocity of Propagation, cursor position, range and gain value. These may be recalled and used for comparison with current cables under test or downloaded to the PC via the USB link and TRACEXTRA PC software provided. Historical data stored on the PC may also be uploaded to the Ranger for comparison with current measurements.

Ekraan 128 x 64 pixel (back lit)
Patareid 6 volts 4 x 1.5 AA Alkaline cells
Tööaeg 20 hours continuous scanning (subject to use of backlight)
Mõõdud 165 x 90 x 37 (6.5 x 3.5 x 1.5 ins)
Kaal 350 gms (12oz)
Kaitseklassi Water/Dust Proof IP54
Töötingimused -10º / 50ºC
Hoiutingimused -20º / 70ºC
Resolutsioon Approx 1% of range
Täpsus 1% of selected range*
Kiirustegur Adjustable from 1% to 99% or Feet Meters / Micro Second
Mälu 50 Traces
Vahemik Meters: 2.5, 5, 10, 20, 40, 80, 160, 320, 640; Feet: 7, 15, 30, 60, 120, 240, 500, 1000, 2000. Manual range control
Tundlikkus Min 10 pixel return at 640m on 0.6mm Ø, PE, TP
Gain Preset for Range Scale selected, but with adjustable settings to 7x magnification.
Väljundimpulss 5 volts peak to peak. Into open circuit
Väljundtakistus Selectable 25, 50, 75 & 100 ohms
Väljundimpulsi laius 1.3ns, Automatic with range
Skaneerimise kiirus 2 scans / second or scan held
Jälgede keskmistamine User selectable, Disabled, 8, 16 or 32 point trace
Pingekaitse 250 volts AC
Toonigeneraator 810 – 1100Hz
Väljalülitus Selectable 1, 2, 3 minutes or disabled
Ohutus IEC 61010-1
Burst EN 60950
EMC BS/EN 61326-1

Hetkel pole ühtegi ülevaadet

Kirjutage oma ülevaade

Kaabli Rikke Määraja (TDR) TX Ranger

Kaabli Rikke Määraja (TDR) TX Ranger

The TX Ranger is a hand-held Time Domain Reflectometer (cable fault locator) with a first range of 2.5 meters combined with a 1.3 Nano second pulse width gives a blind zone of only 5 cm, it makes this the ideal product for fault location on short cable assemblies and harnesses. Small and intermittent faults can be easily identified by using the selectable gain control allowing trace amplification of up to 7 times and when set to scan lock mode the advanced noise reduction software may be selected allowing the user to select between 8,16 and 32-point trace averaging further enhancing the clarity of the trace by reducing electrical and environmental interference.

  • Short Range Graphical TDR; 
  • Up to 700m; 
  • Deadzone 0.2m; 
  • Selective Gain; 
  • Trace Comparisons; 
  • USB download to PC. 
Description Language Ver. Link
TXRanger SW Quick Start Guide English TXRanger QSG, EN
TXRanger Users manual English TXRanger Manual, EN

Samas kategoorias on veel 10 toodet :