Ajadomeeni Reflektometer TX8000

TX8000

New product

The TX8000 is a 6 km range Time Domain Reflectometer housed in a rugged over moulded case being water proof to IP67 and drop resistant, designed for outdoor use, but sufficiently small and light weight for general use and may be operated using one hand. Using a 3.5-inch QCGA color display, measurement data information is clearly displayed; an illuminated keypad makes the TX8000 ideal for use in poorly lit areas.

More details

Bi Communications

 

Tellimisel

Palun, küsige hinnapakkumist

939,00 € Maksudeta

0.6 kg
)

Lisa soovinimekirja

Key Features:

  • Locates faults for most of metallic cable types
  • Reduced “dead zone” to 0.5m
  • Impedance setting selectable for 25,50, 75, 100 or 120 ohms
  • 11 range scales between 7 meters and 6 kilometres
  • On-screen comparison of waveforms
  • Pre-set gain for each of its 11 range scales
  • Color LCD 320 x 240 QVGA display with backlight
  • Selectable display brightness
  • Language support - English, German, Spanish and Polish
  • Two scanning modes - single and continuous scan
  • Built-in Tone Generator to transmit 810 to 1100Hz signal for pair
  • identification
  • Dual cursors
  • Key pad backlite
  • Durable housing at the rate of IP67
  • Small to fit in hand, precise and easy to operate

The TX8000 is a 6 km range Time Domain Reflectometer housed in a rugged over moulded case being water proof to IP67 and drop resistant, designed for outdoor use, but sufficiently small and light weight for general use and may be operated using one hand. Using a 3.5-inch QCGA color display, measurement data information is clearly displayed; an illuminated keypad makes the TX8000 ideal for use in poorly lit areas.

Using 11 range scales with a first range of 7 meters near end faults are clearly visible. Using the scan hold function faults may be retained on screen for closer examination or they can be compared on the same screen with another “live” scan from the “good” pair of cores available on the cable under test. In this way, hard to see faults may be easily identified.

The user variable gain function allows small events on the wave form to be magnified for clearer identification. With dual cursors each cursor giving its length measurement and a differential distance between cursors the length of the fault may be identified. To assist in the identification of faults a number of fault types may be super imposed over the displayed fault for easier identification.

Built-in Tone Generator enables pair tracing and identification. Impedance setting selectable for 25,50, 75, 100 or 120 ohms and user selectable Velocity Of Propagation factor makes the TX8000 TDR a perfect instrument for detecting faults on a variety of metal cables from telecom copper, twisted pair or coax cables to LV power cables.

Scope of Delivery:

The TX8000 TDR, 0.5m test lead, shoulder strap, hard carry case, quick start guide and 4 x AA batteries

Ekraan 320mm x 240mm QVGA
Patareid 6 volts, 4 x 1.5 AA Alkaline cells or NMH rechargeable cells
Tööaeg 7 hours typical use
Mõõdud 220 x 98 x 58 mm / 8.7x3-8x2.3 inches
Kaal 0.5 Kg / 1pouind 2 ounces
Kaitseklassi IP67
Hoiutingimused -20º / 70ºC
Resolutsioon Approx. 1% of range
Täpsus 1% of selected range*
Vahemik Meters: 7, 15, 30, 60, 120, 250, 500, 1km, 2km, 3km, 6km; Feet: 23, 49, 98, 197, 394, 820, 1640, 3280, 6560, 9850, 19000. Manual range control
Tundlikkus Min 3 pixel return at 4km on 0,6mm Æ , PE , TP Velocity Factor Adjustable from 10% to 99% or equivalent in Ft/ meters per micro second
Kursorid Dual cursors with a distance measurement between cursors
Väljundimpulss 5 volts peak to peak. Into open circuit
Väljundtakistus 25, 50, 75, 100 & 120 ohms
Väljundimpulsi laius 3 ns to 3 us, Automatic with range
Skaneerimise kiirus 2 scans / second or scan held
Pingekaitse 250 volts AC Operating Temp -10º / 50ºC
Toonigeneraator 810 – 1100Hz
Väljalülitus 1, 2, 3, 5, 10 and 15 minutes or disabled
Ohutus IEC 61010-1 EN 60950
EMC BS/EN 61326-1

Hetkel pole ühtegi ülevaadet

Kirjutage oma ülevaade

Ajadomeeni Reflektometer TX8000

Ajadomeeni Reflektometer TX8000

The TX8000 is a 6 km range Time Domain Reflectometer housed in a rugged over moulded case being water proof to IP67 and drop resistant, designed for outdoor use, but sufficiently small and light weight for general use and may be operated using one hand. Using a 3.5-inch QCGA color display, measurement data information is clearly displayed; an illuminated keypad makes the TX8000 ideal for use in poorly lit areas.

Samas kategoorias on veel 10 toodet :