Time Domain Reflectometer TX6000

TX6000

New product

The TX6000 is a hand held Time Domain Reflectometer with 11 range scales covering the range 0-6000 meters, with a 7 mater first range scale and a 0.5 meter dead zone near and far end faults are clearly displayed on its 128×64 pixel back light Liquid Crystal Display.

  • Graphical TDR; 
  • Up to 6km; 
  • Deadzone 0.7m; 
  • USB download to PC; 
  • Trace Comparison. 

More details

Bi Communications

 

On order

815,00 € Tax excluded

0.6 kg

  • USB 2.0 Interface with a Windows compatible software TraceXtra to download/analyse traces
  • Rugged Palm-Top design
  • Weighs less than 350g (12oz)
  • 11 Measurement Ranges up to 6000m(6km)
  • 25, 50, 75 & 100ohm Selectable Cable Impedance
  • Memory capacity upto 50 saved traces
  • Built in Tone Generator for Pair Tracing and Identification
  • Suitable for testing all Communication and Power Cables
  • Environmental Protection IP54
  • CE Approved
  • Soft bag & Test Leads

The TX6000 is a hand held Time Domain Reflectometer with 11 range scales covering the range 0-6000 meters, with a 7 mater first range scale and a 0.5 meter dead zone near and far end faults are clearly displayed on its 128×64 pixel back light Liquid Crystal Display.

USB 2.0 interface with Windows compatible software “TraceXtra” gives the user an option to download and analyse saved traces to a windows PC. Also the interface allows the user to upload saved traces from PC hard disk to the unit. New firmware upload feature gives the facility to update the unit (TDR) with recent additions.

Designed for identifying and locating faults on all metallic cables with two or more insulated conductors. The TX6000 has impedance matched circuits for 25, 50, 75 and 100 ohms and with velocity of propergation settings from 1-99% (or the equivalent in feet or meters/micro second) will cover the range of power, data, communication and CCTV cables.

Housed in a rugged IP54 rated ABS enclosure and weighing only 350 grams (12 ounces), the TX6000 is suitable for outside use.

Display 128 x 64 pixel (back lit)
Batteries 6 volts 4 x 1.5 AA Alkaline cells
Operating time 60 hours continuous scanning
Dimensions 165 x 90 x 37 (6.5 x 3.5 x 1.5 ins)
Weight 350 gms (12oz)
Protection class Water/Dust Proof IP54
Operating conditions -10º / 50ºC
Storage conditions -20º / 70ºC
Resolution Approx 1% of range
Accuracy 1% of selected range*
Velocity Factor Adjustable from 1% to 99%
Range Meters: 7, 15, 30, 60, 120, 250, 500, 1km, 2km, 3km, 6km; Feet: 23, 49, 98, 197, 394, 820, 1640, 3280, 6560, 9850, 19000. Manual range control
Sensitivity Min 3 pixel return at 4km on 0,6mm , PE , TP
Output Pulse 5 volts peak to peak. Into open circuit
Output Impedance Selectable 25, 50, 75 & 100 ohms
Output Pulse Width 3 ns to 3 ms, Automatic with range
Scan Rate 2 scans / second or scan held (not on 3km/6km range)
Voltage Protection 250 volts AC
Tone Generator 810 – 1100Hz
Power Down Selectable 1, 2, 3, 5 minutes or disabled
Safety IEC 61010-1
Burst EN 60950
EMC BS/EN 61326-1

No customer reviews for the moment.

Write a review

Time Domain Reflectometer TX6000

Time Domain Reflectometer TX6000

The TX6000 is a hand held Time Domain Reflectometer with 11 range scales covering the range 0-6000 meters, with a 7 mater first range scale and a 0.5 meter dead zone near and far end faults are clearly displayed on its 128×64 pixel back light Liquid Crystal Display.

  • Graphical TDR; 
  • Up to 6km; 
  • Deadzone 0.7m; 
  • USB download to PC; 
  • Trace Comparison. 
Description Language Ver. Link
TX6000 Datasheet English TX6000 Datasheet, EN
TX6000 SW Quick Start Guide English TX6000 SW QSG, EN
TX6000 USer's manual English TX6000 Manual, EN

10 other products in the same category: