Last News
-
IT8900A/E High Power DC Electronic Load Jun 21, 2018 -
VeEX® Introduces First 400GE Hand-held Test Set with Native QSFP-DD PAM4 Support Oct 18, 2018 -
LSTE Supplied OTDR and Fiber optic test equipment to the Latvian Data Center DEAC Nov 11, 2018 -
We are changing our catalogue structure Sep 25, 2018 -
Ripley® Tools Sep 7, 2018
Sondes and accessories for cable tracers and other copper- and electric network testing and measuring equipment.
Probes and accessories There are 31 products.
-
Amplifying inductive rod probe SA10 (10kHz)
SA10 is a 10kHz tuned amplifying inductive rod probe that is used with XTR25 or KXR15 receivers for cable tracing when the tracing distance is more than 20cm, like with underground cables. SA10 is used in the same way as ordinary SA1 but the tuned construction increases its sensitivity considerably compared to SA1. SA10 is used also when XT25 and KX15 wire tracers are used for locating the...
-
BNC Adapter (BNC female / BNC female)
BNC-female / BNC-female adapter for connecting receiver probes. Suitable for devices e.g. XTR10 and XTR25.
-
Cable AK1 (BNC/BNC)
AK1 is a BNC/BNC cable used to connect receiving probes to a cable or wire tracer receiver. It is suitable for all Vesala tracers either directly or with a BNC-adapter. By using AK1, probe can be held in hand, which adds reachability in tight places. Cable length is 1 metre.
-
Capacitive probe KA6
KA6 is a small size capacitive receiver probe for tracing and identifying wires and pairs and for detecting mains wires inside walls. It has an isolated construction, hence it is safe to use even with galvanically exposed wires. KA6 has very slim construction and a hook-shaped tip, which makes it easy to pull out pairs even from a tight bunch of wires. When using a receiver, the strongest...
-
Carrying bag KPP5
Carrying bag KPP5 is designed for easy carrying and storing of Vesala wire and cable tracers. The bag protects the devices against rain and dust and keeps them ready for use. It also provides room for other tools, user’s manual etc. The bag is made of nylon. KPP5 is equipped with a coloured label according to the equipment inside, as seen in the image. Size: 240 x 130 x 180 mm. Compatible...
-
Connecting cord AP15B
Connecting cable for the AP32 test telephone, RJ45 / 2 x 4mm banana, length 1.5m.
-
Connecting cord AP15RJ (RJ45/RJ12)
Connecting cable for the AP32 test telephone, RJ45 / RJ12, length 1.5m. Note: RJ12 connector is suitable for both RJ11 and RJ45 sockets but does not damage the outermost contacts of the RJ45 like an ordinary RJ11 plug would do.
-
Connecting cord PJ15 (RCA/Banana, 1.5m)
PJ15 (black) is an uninsulated RCA/banana cable to be used as speech connection with devices that have speech communication possibility. The banana plugs can be equipped with several different adapters e.g. for different terminal block types. Cable length is 1.5 meters and it has been made of specially treated PVC material keeping it flexible also at sub-zero temperatures. Compatible devices:...
-
Connecting cord PJ15p (RCA/Banana, 1.5m)
PJ15p (red) an R`CA/banana cable to connect e.g. cable tracer transmitter to the target. PJ15p has insulated RCA plug which reduces risk of electric shock in case of misuse. The banana plugs can be equipped with several different adapters e.g. for different terminal block types. Cable length is 1.5 meters and it has been made of specially treated PVC material keeping it flexible also at...
-
Connecting cord S3TB (Schuko/Safety banana)
S3TB is a special cord for TraceMeter TM30. With S3TB user can connect TMT30 transmitter to Schuko-type wall sockets to transmit tracing signal or for measurements. S3TB has three colored 0.5m long wires and a flexible braid. Compatible devices: TM30
-
Connecting cord SJ12 (Banana/Banana)
SJ12 is a universal banana/banana cable to connect e.g. cable tracer transmitter to the target. The same cable is often used as speech connection with older Vesala devices that have speech communication possibility through banana connectors. The banana plugs can be equipped with several different adapters e.g. for different terminal block types. Cable length is 1.2 meters and it has been made...
-
Connecting cord SJ20 (Banana/Banana)
SJ20 is a universal banana/banana cable to connect e.g. cable tracer transmitter to the target. The same cable is often used as speech connection with older Vesala devices that have speech communication possibility through banana connectors. The banana plugs can be equipped with several different adapters e.g. for different terminal block types. Cable length is 2 meters and it has been made of...
-
Connecting cord TB10 (Safety banana / Safety banana)
TB10p/TB10m is a red/black cord with safety banana plugs. It is intended to be used with TraceMeter TM30 device. With TB10p/TB10m and suitable adapters TMT30 transmitter can be safely connected to live mains targets for tracing or measurements. Cord length is 1.0m. Compatible devices: TM30
-
-
Feeder antenna SPA10/20
SPA10/20 is an accessory for the Vesala cable tracers. It is suitable for tracing e.g. small empty cable piping routes in buildings, prefabricated hollow wall blockages or non-conductive sewers and their blockages. Usage of SPA10/20 resembles usage of the pipe transmitters, which is an independent transmitter.
