Light, portable signal analyzer for detecting, analyzing and localizing RF signals and interference. 9 kHz to 6 GHz
Interference and Direction Analyzer IDA 2 is a highly sensitive signal analyzer.
IDA 2 combines excellent RF signal selectivity with fast monitor capabilities and integrated tools such as a double compass and map display for determining the geographical location of RF sources.
The main tasks of the IDA 2 are the detection, analysis and localization of RF signals. Outstanding features of this portable instrument are functions such as Horizontal Scan with automatic azimuth determination and smartDF® for automatic calculation of the emitter position.
The robust, ergonomic design is protected against mechanical stress, weather effects and high power RF irradiation.
Measurements made with the IDA 2 quickly yield results thanks to its practically oriented operating modes:
The risk of RF interference due to unintentional emissions and interactions has greatly increased with the growth in the use of wireless technologies. IDA 2 is designed for rapid detection and localization of all types of RF emissions. Some example applications:
Please be aware that the software might be subject to US or EU export control. It will be your responsibility to comply with all applicable export control laws and regulations. For more information, please contact the manufacturer directly.
Included in delivery:
IDA-3106 Basic Unit
- Power Supply 12VDC,100V-240VAC
- Cable, USB2.0
- Mem-Card Reader, microSD/USB
- Software, IDA Tools
- Operating Manual IDA-3106
- Remark: no case
|3 hours (nominal), battery pack is hot swappable
|213 mm x 297 mm x 77 mm
|2.8 kg (basic unit including battery)
|9 kHz to 6 GHz
The handle is ergonomically shaped and fits snugly in the hand, and yet it is a technically sophisticated device with several function. It accepts antennas in horizontal and vertical positions, contains a switchable preamplifier, a compass, position sensors, and a measurement start / stop button. The antenna handle communicates with the basic unit through a control cable.
Antenna 1 covers the frequency range from 20 MHz to 250 MHz. It therefore includes the ISM band at 27 MHz, and is particularly suitable for interference and spurious signal searching in the VHF broadcast radio range, but also covers the lower end of VHF television and includes DAB frequencies.
Antenna 2 covers the frequency range from 200 MHz to 500 MHz, making it eminently suitable for interference and spurious signal searches on all communications services within this band, and also includes the 433 MHZ ISM frequency.
The 400 MHz to 6 GHz frequency range of Antenna 3 covers the entire spectrum of mobile communications including LTE and WLAN, and also includes L, S, and C band radar, for example.
This low-frequency loop antenna is particularly suitable for detecting defective or poorly screened switched power supplies or electrical controllers that emit interference, and for identifying interference due to power line carrier systems, or demonstrating interference with other signals in the very low frequency range (ultra long wave).
No customer reviews for the moment.
|Datasheet IDA 2
|IDA 2 Datasheet, EN
|Datasheet RF Filters
|Filters Datasheet, EN
|Brochure IDA 2
|NSTS 04/17 E0330A
|IDA 2 Brochure, EN
|Flyer IDA in action at major events
|NSTS 0812 ME-E0299A
|IDA in action Flyer, EN
|IDA 2 Commands
|IDA 2 Commands, EN
|Flyer IDA 2 - HiRes Spectrum Analyzer
|IDA 2 Flyer, EN
|Technical Note: IDA 2 Horizontalscan
|TN: Horizontal Scan, EN
|Technical Note: IDA 2 Interference Localization
|TN: Interference Localization, EN
|Technical Note: IDA 2 IQ Analyzer
|TN: IQ Analyzer, EN
|Technical Note: IDA 2 Attenuator
|TN: Attenuator, EN
|Technical Note: IDA 2 User generated maps
|TN: Maps, EN
|Technical Note: IDA 2 Receiver and Spectrum Analyzer
|TN: Receiver, EN
|Technical Note: IDA 2 HiRes Spectrogram
|TN: Spectrogram, EN
|Technical Note: IDA 2 Revealing Interference
|TN: Interference, EN
|Technical Note: IDA 2 Filter/td>
|TN: Filter, EN
|Technical Note: IDA 2/NRA IQ Data
|TN: IQ Data, EN
|Technical Note: IDA 2 Datarate Responsetime
|TN: Responsetime, EN
|Application Note: IDA 2 GSM Intermodulation
|AN: Intermodulation, EN
|Application Note: IDA 2 Interference Measurement and Localization
|AN: Interference, EN
|Application Note: IDA 2 Jammer
|AN: Jammer, EN
|Application Note: IDA 2 Multitransmitter Airport Stuttgart
|AN: Multitransmitter, EN
|Application Note: IDA 2 - Demosoftware - General
|AN: Demo, EN
IDA 2 - How to analyze GSM/2G with the Narda IDA2 Spectrum and Signal Analyzer
IDA 2 - Direction Finding, Geolocation, Horizontal Scan and Radio Bearing in the Narda IDA
IDA 2 - Understanding 4G LTE on the air interface with the IDA2
IDA - Multi Channel Table and Transmitter Table Features
IDA 2 - How to use the IDA as an oscilloscope in Time Domain / Scope Mode
IDA 2 - Creating screenshots and saving data in the IDA from narda
IDA 2 - Record or store measuring data automatically with the IDA
IDA 2 - How to optimize or customize Your measuring view on the IDA display