BI30001
New product
The NEW Lancaster Pro-ST is a low cost wire map tester which tests and certifies structured cabling continuity to a TIA568A/B , USOC and ISDN standards. The new Lancaster Pro-ST displays on screen wiring configurations showing the length of all 4 pairs and length of pair to fault up to 150m (500ft).
 
По заказу
Warning: Last items in stock!
Availability date:
The Lancaster Pro-ST will store up to 1000 test results which can be viewed or be downloaded to a PC via the lancaster pro-st software (provided). test results can then be customised with you corporate identity and certificates produced displaying the customer’s location/job, length, cable VP and testing standard .
Maintaining all the proven features of the Lancaster Pro ST identifies all common faults on wiring schemes installed to TIA568A/B USOC and ISDN standards including open circuit wires, shorted pairs, shorts between pairs , crossed pairs , split pairs , pair reversals and shield /screen continuity.
In addition the Lancaster Pro-ST has a large backlit screen.
As with the standard Lancaster the Pro-ST can check installed wiring networks , alerting the operator if any telephone services are active on the cable test and can test for and indicate any other active services (10mb/s, 100mb/s, token ring etc. to prevent accidental testing of a live network. In addition, a built in tone generator (oscillator) transmits a warble tone into the cable enabling detection and tracing using a standard probe.
The LanCaster Pro-ST comes complete with one intelligent remote office identifier with a further 15 units available as optional accessories, unlike far end units on competitor products the Lancaster Pro-ST remotes are intelligent and indicate if the test has passed or failed.
Элементы питания | 4×1.5 AA alkaline Battery |
Время работы | Standby 4000hrs Continuous testing more than 7.5 hrs |
Размеры | 165 x 90 x 37mm |
Вес | 350gms (12oz) |
Условия эксплуатации | 0 to 40 deg. C |
Условия хранения | -20 to 70 deg. C |
Типы кабелей | UTP, STP, FTP, SSTP |
Измерение длины | 0 – 150m or 500ft |
Индикация ошибок | Short Circuit Pair, Open Circuit Wire, Short Between Pairs, Split / Cross Pairs, Pair Reversals |
Отображение неисправностей | All Fault and setting info displayed graphically and textually, Shield Continuity |
Локализация неисправностей | Near or Remote End or distance if midway |
Схемы подключения | TIA568A/B, USOC & ISDN |
Индикация сервиса | Telephone, 10BaseT, 100Mbit+, Token Ring |
Напряжение | Warns off TNV (Telecom Network Voltage) |
Тон генератор | Oscillating 810 / 1110Hz |
Языки | English (UK USA) German, French Spanish, Portuguese, Italian |
Индикация состояния батареи | Bar Graph |
Дисплей основного блока | 128×64 graphical LCD |
Дисплей удаленного блока | Green/Red LED |
Безопасность | IEC61010-1 |
CE | Compliant with Current EU Directives |
Burst | EN61000-4-4 |
EMC | EN50081 / 50082 |
Conducted RF | EN61000-4-6 |
ESD | EN61000-4-2 |
EM | EN61000-4-3 |
Еще нет отзывов.
Description | Language | Ver. | Link |
LanCaster Pro ST Datasheer | English | LanCaster Pro ST Datasheet, EN | |
LanCaster Pro ST Manual with RS232 support | English | V1 | LanCaster Pro ST Manual v1, EN |
LanCaster Pro ST Manual | English | V2 | LanCaster Pro ST Manual v2, EN |