IT6000B Система регенеративного питания

IT6000B

New product

IT6000B объединяет двунаправленный источник питания и рекуперативную электронную нагрузку в одном блоке 3U. Он также достаточно мощный. Для переключения между двунаправленным источником питания и рекуперативной электронной нагрузкой требуется только нажатие кнопки.

More details

ITECH

 

Пожалуйста, запросите предложение

0,00 € Без НДС

Добавить в избранное

From the perspective of improving customer experience, ITECH launches a new incorporated product--IT6000B series. IT6000B integrates bidirectional power supply and regenerative electronic load into one 3U unit. It is also a very powerful one. Only a button is needed to switch between the bidirectional power supply and the regenerative electronic load. It can be used not only as a stand-alone powerful bidirectional power supply, as a source to provide power; but also as an independent regenerative electronic load, to absorb the consumed energy and feedback cleanly to the grid. IT6000B offers standard two-quadrants functionality. IT6000B provides 7 voltage ranges, up to 2250V, supports master-slave parallel with even current distribution up to 1152kW. Built-in waveform generator supports generating arbitrary waveforms, and imports LIST files for waveforms via USB interface. IT6000B is the combination of reliability, high efficient setting, safe and multiple measurement functions. IT6000B is a family of bi-directional, regenerative power system with excellent performance, extensively used in aspects of high power battery, automotive electronics, green energy, high speed testing etc.

 

Features

  • Bi-directional device – power supply and electronic load in one
  • One button switch between source and sink on panel
  • Stand-alone power up to 144kW, expandable in parallel up to 1.152MW
  • Voltage output ratings: 0-2250V
  • Current output ratings: 0-2040A
  • High power density design provides 18kW in 3U space
  • Bi-directional energy transmission, seamless switching across two quadrants
  • Support CC/CV loop speed and priority setting
  • Built-in voltage curves comply with DIN 40839, ISO-16750-2/ISO21848 automotive standards
  • High efficient energy recovery
  • Support solar panel I-V curves simulation
  • Built-in waveform generator, support generating arbitrary wave forms
  • Adjustable output impedance
  • Complete protection, support OVP, ±OCP, ±OPP, OTP, voltage transient drop protection and anti-islanding protection
  • Built-in USB/CAN/LAN/digital IO interface, Optional GPIB/Analog & RS232

One button switch between source and sink

IT6000B innovatively incorporate two devices in one: a bidirectional power supply and a regenerative electronic load. The devices offer the functional button on panel for easy two-quadrants operation, either as a bidirectional programmable DC power supply or as a DC electronic load with recovery function. It reduces the space , cost and efforts on DUT for separate units.

One button switch between source and sink

 

Bi-directional energy, seamless switching

The IT6000B Series combines bi-directional power supply and regenerative load function in one. Unlike traditional power supplies and E-loads, for which there will be short transitions and incontinuity in the middle of positive and negative current switching, IT6000B is a standard high-speed bidirectional power supply. It can switch seamlessly between source and sink mode fast and continuously, which avoids voltage or current overshoot effectively. It can be applied to battery test, cell packaging equipment test, battery protection board test, etc.

Bi-directional energy, seamless switching

 

High energy regenerative efficiency

The IT6000B series has a unique function of energy regenerative that can regenerate electrical energy and then directly use it in the plant instead of consuming it in the form of heat. Its conversion efficiency can reach up to 95%, which not only greatly reduces the user's electricity cost, but also avoids the use of air conditioning or expensive cooling systems.

Most of the conventional electronic loads are energy-consuming loads. In addition to the high cost of electricity, large amounts of carbon dioxide, sulfur dioxide, nitrogen oxides and other greenhouse gases or harmful gases are generated during power generation, which is harmful to the environment. IT6000B can avoid any of these by its regenerative function.

High energy regenerative efficiency

 

Application for solar array simulation

IT6000B optional SAS1000 SOLAR ARRAY SIMULATION SOFTWARE, users can easily use the software to output, measure, display the maximum power and track status of photovoltaic inverter in real time and record value. With the built-in EN50530 / Sandia NB/T32004 / C GC/GF004 /CGC/GF035 regulatory testing procedures, it is simple for users to simulate I-V curves, test the static and dynamic MPPT performance of PV inverters and generate reports. Solar simulation power supply also provides the shadow and table mode, Users can enter up to 4096 points array to edit any shielded IV curve and achieve dynamic shadow effect. Or users can store 100 I-V curves under different irradiation and temperature, set operation time and order to test the long-term MPPT of photovoltaic inverters under different climatic conditions.

Application for solar array simulation

 

Built-in voltage curves for a variety of standard automotive voltage curves

Automotive electronics may often experience power transients during vehicle start-up and operation. To ensure that the device under test can withstand these actual transients, the tester must simulate worst-case power transient conditions during the test. According to the relevant standards of the industry, the IT6000B has built-in voltage curves for DIN40839, ISO-16750-2, SAEJ1113-11, LV124 and ISO21848 standard automotive voltage curves. Users can easily recall various waveforms directly, such as voltage drop waveform during vehicle starting up, pulse waveform and other related automotive electronics waveforms for performance tests. Available voltage grades in 12V, 24V and 48V.

Built-in voltage curves for a variety of standard automotive voltage curves

  

CC & CV Priority

IT6000B has CC/CV priority function which is the newest concept in the industry. It can meet different application requests such as fast speed or no overshoot and make the test more flexible. Users can choose CC/CV loop response time and loop working mode to decide the output to be voltage high speed mode or current no overshoot mode. This unique function makes it suitable for the application of high power integrated circuit test, charging and discharging test, military and transient simulation test of automotive electronics etc.

CC&CV PriorityCC&CV Priority

 

Patented parallel technology

  • IT6000 has adopted ITECH patented parallel technology
  • All the function and performance will be the same as standalone unit
  • No need to calibrate after paralleling
  • Fiber transmission, good for anti-interference
  • Digital paralleling, fully insulated, good for protecting DUT

Patented parallel technologyPatented parallel technology

* - Yellow - output voltage

* - Purple - output current

Patented parallel technology

Еще нет отзывов.

Написать отзыв

IT6000B Система регенеративного питания

IT6000B Система регенеративного питания

IT6000B объединяет двунаправленный источник питания и рекуперативную электронную нагрузку в одном блоке 3U. Он также достаточно мощный. Для переключения между двунаправленным источником питания и рекуперативной электронной нагрузкой требуется только нажатие кнопки.

Models diagram




Models

IT6000C Series Documents

Description Language Ver. Link
IT6000C Series Datasheet English IT6000C Datasheet, EN
IT6000B Series Datasheet English IT6000B Datasheet, EN
IT6000D Series Datasheet English IT6000D Datasheet, EN

ITECH Test Solutions

Description Language Ver. Link
Solar/PV inverter solution English Solar Photovoltaic Test, EN
Aerospace/Military Test Solution English Aerospace Test Solution, EN
Automotive Electronics Test Solution English Auto. Electronics Test Solution, EN
Education Application Solution English Education Application Solution, EN
Electrical Motor And Power Generating Equipment Test Solution English Power Generating Equipment Test Solution, EN
Battery Test and Simulation English Battery Test and Simulation, EN
New Energy Vehicle Test Solution English Vehicle Test Solution, EN
IoT Testing Solution English IoT Testing Solution, EN
Power supply testing solutions English Power supply testing solutions, EN
Semiconductor /IC Testing Solution English Semiconductor Testing Solution, EN

ITECH Products Catalogues

Description Language Ver. Link
ITECH Basic Product Catalogue (OneDrive link) English 2018 Basic Products Catalogue, EN
ITECH High Preformance Products Catalogue (OneDrive link) English 2018 HP Products Catalogue, EN

В этой категории 16 товаров: