Norāde: BFD-400-1
Zīmols: Narda Safety Test Solutions
Isotropic measurement of electric fields from 600MHz to 6GHz using the Field Meter FieldMan®
The probe detects electric fields from 600 MHz to 6 GHz and is thus particularly suitable for measuring the field strength generated by mobile radio base stations and wireless LAN systems. Due to its high dynamics and its sensitivity of 0.2 V/m, the probe can detect even low field strengths accurately. The probe exceeds the requirements of the basic standards EN 50492, IEC 62232 and HJ 972-2018 (China), but uses a band limitation that suppresses electromagnetic fields below 600 MHz.
The probe's interface digitally transmits the measurement data to the base unit, which has no individual influence on the measured values and therefore does not need to be calibrated. The accredited probe calibration is carried out at several frequencies. The calibration data is stored in the probe and is automatically taken into account during the measurement. If the frequency of the predominating field strength is known, a correction factor can additionally be applied to increase the measurement accuracy.
Datu lapa
Datasheet Probe EFD-0692, v. NSTS 1122-E0388A, English
Lejupielādēt (353.79KB)Jūsu pateicības ziņojumu nevar nosūtīt
Zinot par atsauksmi
Ziņojums nosūtīts
Jūsu ziņojumu nevar nosūtīt
Uzraksti atsauksmi
Atsauksme nosūtīta
Jūsu atsauksmi nevar nosūtīt
Norāde: BFD-400-1
Zīmols: Narda Safety Test Solutions
Norāde: EFD-9091
Zīmols: Narda Safety Test Solutions
Norāde: EFD-0392
Zīmols: Narda Safety Test Solutions
Norāde: HFD-0191
Zīmols: Narda Safety Test Solutions
Norāde: EFD-0391
Zīmols: Narda Safety Test Solutions
Norāde: EFD-1891
Zīmols: Narda Safety Test Solutions
Norāde: EFD-5091
Zīmols: Narda Safety Test Solutions
Norāde: EFD-0691
Zīmols: Narda Safety Test Solutions
Norāde: EFD-6091
Zīmols: Narda Safety Test Solutions
Norāde: EFD-4091
Zīmols: Narda Safety Test Solutions
Norāde: 2460/101
Zīmols: Narda Safety Test Solutions
check_circle
check_circle