Time Domain Reflectometer TX4000 View larger

Time Domain Reflectometer TX4000

TX4000

New product

The TX4000 is a hand held Time Domain Reflectometer with 11 range scales covering the range 0-4000 meters, with a 7 mater first range scale and a 0.5 meter dead zone near and far end faults are clearly displayed on its 128×64 pixel back light Liquid Crystal Display.

  • Graphical TDR; 
  • Up to 4km; 
  • Deadzone 0.7m; 
  • Auto Fault Location; 
  • User Variable Gain; 
  • Tone Generator.

More details

Bi Communications

 

Pēc pasūtījuma

Lūdzu, lūdziet cenu

727,00 € BEZ PVN

0.6 kg

Pievienot vēlamo produktu sarakstam

  • Auto Fault Location
  • Rugged Palm-Top design
  • Weighs less than 350g (12oz)
  • 11 Measurement Ranges up to 4000m(4km)
  • 25, 50, 75 & 100ohm Selectable Cable Impedance
  • User Variable Gain Control
  • Built in Tone Generator for Pair Tracing and Identification
  • Suitable for testing all Communication and Power Cables
  • Environmental Protection IP54
  • CE Approved
  • Soft bag & Test Leads

The TX4000 is a hand held Time Domain Reflectometer with 11 range scales covering the range 0-4000 meters, with a 7 mater first range scale and a 0.5 meter dead zone near and far end faults are clearly displayed on its 128×64 pixel back light Liquid Crystal Display.

The Auto Fault Location key will move the cursor directly to the first event or fault, thus eliminating the need to visually interpret the wave form. When set in manual mode, the wave form may be visually scanned as on conventional TDRs. In both modes the user variable gain covering the range of default to 64 db’s may be used to magnify small events identified on the waveform. The scan lock feature will allow the user to hold the trace for closer examination.

Designed for identifying and locating faults on all metallic cables with two or more insulated conductors. The TX4000 has impedance matched circuits for 25, 50, 75 and 100 ohms and with velocity of propergation settings from 1-99% (or the equivalent in feet or meters/micro second) will cover the range of power, data, communication and CCTV cables.

Housed in a rugged IP54 rated ABS enclosure and weighing only 350 grams (12 ounces), the TX4000 is suitable for outside use.

Displejs 128 x 64 pixel (back lit)
Baterijas 6 volts 4 x 1.5 AA Alkaline cells
Operating time 60 hours continuous scanning
Izmēri 165 x 90 x 37 (6.5 x 3.5 x 1.5 ins)
Svars 350 gms (12oz)
Aizsardzības klase Water/Dust Proof IP54
Darbības nosacījumi -10º / 50ºC
Glabāšanas apstākļi -20º / 70ºC
Izšķirtspēja Approx 1% of range
Precizitāte 1% of selected range*
Ātruma koeficients Adjustable from 1% to 99%
Range Meters: 7, 15, 30, 60, 120, 250, 500, 1km, 2km, 3km, 4km; Feet: 23, 49, 98, 197, 394, 820, 1640, 3280, 6560, 9850, 13120. Manual range control
Jutīgums Min 3 pixel return at 4km on 0,6mm, PE, TP
Izejas impulss 5 volts peak to peak. Into open circuit
Izejas pretestība Selectable 25, 50, 75 & 100 ohms
Izejas impulsa platums 3 ns to 3 ms, Automatic with range
Skenēšanas ātrums 2 scans / second or scan held (not on 3km/6km range)
Aizsardzība pret spriegumu 250 volts AC
Tone Generator 810 – 1100Hz
Izslēgt Selectable 1, 2, 3, 5 minutes or disabled
Safety IEC 61010-1
Burst EN 60950
EMC BS/EN 61326-1

Šobrid vēl nav klientu atsauksmju.

Uzrakstīt recenziju

Time Domain Reflectometer TX4000

Time Domain Reflectometer TX4000

The TX4000 is a hand held Time Domain Reflectometer with 11 range scales covering the range 0-4000 meters, with a 7 mater first range scale and a 0.5 meter dead zone near and far end faults are clearly displayed on its 128×64 pixel back light Liquid Crystal Display.

  • Graphical TDR; 
  • Up to 4km; 
  • Deadzone 0.7m; 
  • Auto Fault Location; 
  • User Variable Gain; 
  • Tone Generator.
Description Language Ver. Link
TX4000 Datasheet English TX4000 Datasheet, EN
TX4000 Users manual English TX4000 Manual, EN

10 produktu tajā pat kategorijā: