Duct sonde MPL9

Nauja prekė

MPL9 is flexible and only 9mm diameter transmitter sonde for tracing microduct and other tube blockages. It is very useful when new cables are to be pushed into old ducts, which already have installed cables or other obstacles. MPL9-10 is compatible with Vesala’s 10kHz wire and cable tracers.

Smulkiau

 

0.09 kg

MPL9 is flexible and only 9mm diameter transmitter sonde for tracing microduct and other tube blockages. It is very useful when new cables are to be pushed into old ducts, which already have installed cables or other obstacles. MPL9-10 is compatible with Vesala’s 10kHz wire and cable tracers.

The MPL9-10 construction includes the transmitter unit and battery compartment, which are connected together. The semi-rigid construction helps the device pass tube curves, joints and obstacles easily. This way constructor can validate if ducts are usable for new cables or not. MPL9 is intended for ducts having inner diameter of 12mm or more.

Working with MPL9

MPL9turns on and starts sending tracing signal when a battery is inserted and the battery compartment is turned to the middle part. The sonde is attached to the tip of a push rod (snake) by its M6 female thread, located at the end of the battery compartment. Alternatively the sonde can be taped to the side of the push rod to reduce risk of damage.

After that the sonde is pushed into the duct. If there is a blockage in the duct, its location can be roughly estimated using the length of the rod and cable & duct maps. After that the exact location of MPL9-10 is traced in the area above ground with a cable tracer receiver. Knowing the exact spot of a blockage considerably saves time and reduces unnecessary digging costs.

There is a blinking red light at the tip of the transmitter indicating transmitter operation. The disposable lithium battery unit gives energy for approx. 10 hours total usage.

MPL9-10 diameter is 9.0mm and length with mounted battery compartment 137mm.

Matmenys Length: 137 mm
Diameter 9.0 mm
Dažnis MPL9-10 (10kHz); MPL9-33 (33kHz)
Transmitter appliance class IP67 / IK07
Transmitter batteries CR535
Transmitter operating time 10h
Range in open air 3.5m (MPL9-10); 5.7m (MPL9.33)
Range in cast iron duct 0m
  • MPL6-Bat is spare battery kit for MPL9-10 and MPL9-33 microduct transmitter sondes. Kit includes 10 pcs 3.0V Lithium cells in a handy plastic box. Typically one cell enables approximately 10 hours of service time after which it is discarded. These cells are not delivered one by one.

  • CL43 Compact Locator is an affordable and easy-to-use wire and cable and duct sonde locator. Outdoors CL43 can be used to trace and pinpoint underground cables from several metres depth. Indoors CL43 can be used to locate for example floor heating cables and wires inside walls.

  • Battery compartment MPL9-M5 with M5 mounting thread for MPL9 duct sondes

Šiuo metu klientų atsiliepimų nėra.

Parašyti atsiliepimą

Duct sonde MPL9

Duct sonde MPL9

MPL9 is flexible and only 9mm diameter transmitter sonde for tracing microduct and other tube blockages. It is very useful when new cables are to be pushed into old ducts, which already have installed cables or other obstacles. MPL9-10 is compatible with Vesala’s 10kHz wire and cable tracers.

MPL9 Basic set

1. Transmitter MPL9-10 or MPL9-33, 1 psc.
2. Pocket-size plastic box, 1 psc.
3. Users manual in English, Finnish, Swedish or Russian, 1 psc.
4. Batteries, 2 pcs.

Video demonstration


 

Description Language Ver. Link
Duct sondes technical description English 1805 Duct sondes, EN

11 kitos prekės toje pačioje kategorijoje: