Duct sonde MPL6

Nauja prekė

MPL6 is micro-sized transmitter sonde for tracing microduct and other tube blockages. It has only 6.4mm diameter so it fit into ducts having inner diameter of 8mm or more. MPL6-10 is compatible with Vesala’s 10kHz wire and cable tracers.

Smulkiau

 

0.063 kg

MPL6 is micro-sized transmitter sonde for tracing microduct and other tube blockages. It has only 6.4mm diameter so it fit into ducts having inner diameter of 8mm or more. MPL6-10 is compatible with Vesala’s 10kHz wire and cable tracers.

MPL6 construction includes the transmitter unit and battery compartment, which are connected together with a semi-rigid middle part. The shape of the transmitter and the unique construction help the sonde pass tube curves and joints easily.

Working with MPL6

MPL6 turns on and starts sending tracing signal when a battery is inserted and the battery compartment is turned to the middle part. The sonde is attached to the tip of a push rod by its M5 female thread, located at the end of the battery compartment. Alternatively the sonde can be taped to the side of the push rod to reduce risk of damage. Sonde can also be attached to the tip of an optical cable, after which the sonde is jetted into a microduct together with the cable.

If there is a blockage in the microduct, its location can be roughly estimated using the jetted cable or rod length and cable & duct maps. After that the exact location of MPL6-10 is traced in the area above ground with a cable tracer receiver. Knowing the exact spot of a blockage considerably saves time and reduces unnecessary digging costs.

Other usage and batteries

Both the transmitter unit and the battery unit are watertight enabling underwater use. There is a blinking red light at the tip of the transmitter indicating transmitter operation. Lithium battery gives approx. 10 hours total usage time depending on ambient temperature.

Matmenys Length 84mm
Diameter 6.4 mm
Dažnis MPL6-10 (10kHz), MPL6-33 (33kHz)
Transmitter appliance class IP67 / IK03
Transmitter operating time 10 h
Range in open air 1.2 m
Range in cast iron duct 0 m

Šiuo metu klientų atsiliepimų nėra.

Parašyti atsiliepimą

Duct sonde MPL6

Duct sonde MPL6

MPL6 is micro-sized transmitter sonde for tracing microduct and other tube blockages. It has only 6.4mm diameter so it fit into ducts having inner diameter of 8mm or more. MPL6-10 is compatible with Vesala’s 10kHz wire and cable tracers.

MPL6 Basic set

1. Transmitter MPL6-10 or MPL6-33, 1 psc.
2. Pocket-size plastic box, 1 psc.
3. Users manual in English, Finnish, Swedish or Russian, 1 psc.
4. Batteries, 2 pcs.

Video demonstration


 

Important delivery information

Due to the distributor limitation, we may supply this device to the following countries only:

  • Estonia;
  • Latvia;
  • Lithuania;
  • Russian Federation;
  • Byelorussia;
  • Khazakhstan;
  • Ukraine;
  • Moldova;
  • Georgia;
  • Armenia;
  • Azerbaidzhan;
  • Tajikistan;
  • Kyrgyzstan;
  • Uzbekistan;
  • Turkmenistan.
If You wish to buy this device in another country, not listed above, please let us know and we will advice You.

Thank You for Your understanding.

Best regards,
LSTE Team
Description Language Ver. Link
Duct sondes technical description English 1704 Duct sondes, EN

11 kitos prekės toje pačioje kategorijoje: