MPL6 is micro-sized transmitter sonde for tracing microduct and other tube blockages. It has only 6.4mm diameter so it fit into ducts having inner diameter of 8mm or more.
Dėmesio: Paskutinė prekė atsargose!
MPL6 is micro-sized transmitter sonde for tracing microduct and other tube blockages. It has only 6.4mm diameter so it fit into ducts having inner diameter of 8 mm or more.
MPL6 construction includes the transmitter unit and battery compartment, which are connected together with a semi-rigid middle part. The shape of the transmitter and the unique construction help the sonde pass tube curves and joints easily.
MPL6 turns on and starts sending tracing signal when a battery is inserted and the battery compartment is turned to the middle part. The sonde is attached to the tip of a push rod by its M5 female thread, located at the end of the battery compartment. Alternatively the sonde can be taped to the side of the push rod to reduce risk of damage. Sonde can also be attached to the tip of an optical cable, after which the sonde is jetted into a microduct together with the cable.
If there is a blockage in the microduct, its location can be roughly estimated using the jetted cable or rod length and cable & duct maps. After that the exact location of MPL6-10 is traced in the area above ground with a cable tracer receiver. Knowing the exact spot of a blockage considerably saves time and reduces unnecessary digging costs.
Both the transmitter unit and the battery unit are watertight enabling underwater use. There is a blinking red light at the tip of the transmitter indicating transmitter operation. Lithium battery gives approx. 9 hours total usage time depending on ambient temperature.
|Transmitter appliance class||IP67 / IK03|
|Transmitter operating time||9 h|
|Range in open air||2.3 m|
|Range in cast iron duct||0 m|
Prisijunkite arba užsiregistruokite norėdami pamatyti kainą60,00 € On order Su PVM
MPL6-Bat V3 is spare battery kit for the latest V3 version of MPL6-10 and MPL6-33 microduct transmitter sondes with fixed battery compartment and semi-rigid construction. Kit includes 10 pcs 3.0V Lithium cells in a handy plastic box. Typically one cell enables approximately 10 hours of service time after which it is discarded. Lithium cells are not delivered one by one. For MPL6-10/MPL6-33 V3...
Prisijunkite arba užsiregistruokite norėdami pamatyti kainą60,00 € Su PVM
Prisijunkite arba užsiregistruokite norėdami pamatyti kainą639,00 € On order Su PVM
CL43 Compact Locator is an affordable and easy-to-use wire and cable and duct sonde locator. Outdoors CL43 can be used to trace and pinpoint underground cables from several metres depth. Indoors CL43 can be used to locate for example floor heating cables and wires inside walls.
Prisijunkite arba užsiregistruokite norėdami pamatyti kainą639,00 € Su PVM
Šiuo metu klientų atsiliepimų nėra.
|Duct sondes technical description||English||1805||Duct sondes, EN|
|1. Transmitter MPL6-10 or MPL6-33, 1 psc.|
|2. Pocket-size plastic box, 1 psc.|
|3. Users manual in English, Finnish, Swedish or Russian, 1 psc.|
|4. Batteries, 2 pcs.|