LS14250 is a 3.6V Lithium battery suitable for the PL18-05, PL18-10 and PL18-33 duct transmitter sondes. Battery capacity is typically 1200mAh but it may vary depending on the manufacturer. Battery maximum size is approx. 14.6 x 25.2mm. Battery is sold by piece.
This blocking filter has been designed for use with the BI Communications TX Range of Time-Domain Reflectometers. When used with the TDR, it will allow the testing of powered cables up to a maximum of 600V CAT IV.
The TX Ranger is a hand-held Time Domain Reflectometer (cable fault locator) with a first range of 2.5 meters combined with a 1.3 Nano second pulse width gives a blind zone of only 5 cm, it makes this the ideal product for fault location on short cable assemblies and harnesses. Small and intermittent faults can be easily identified by using the selectable gain control allowing trace amplification of up to 7 times and when set to scan lock mode the...
Used for ferrule end-face of fiber optic adapters, connectors, plugs etc. cleaning while fiber optic networks construction or service. Cleaning part made of lint-free material and has the perfect fit for cleaning. Suitable for 1.25 mm connectors (LC/MU) both UPC and APC polishing.
Used for ferrule end-face of fiber optic adapters, connectors, plugs etc. cleaning while fiber optic networks construction or service. Cleaning part made of lint-free material and has the perfect fit for cleaning. Suitable for 2.5 mm connectors (SC/FC/ST) both UPC and APC polishing.
Professional tool for cutting fiber optics (glass fiber cables)
The FaultCasterTM is a palm-top Digital Time Domain Reflectometer designed to detect and locate faults on all types of copper cable up to a distance of 2000m (6,000ft). Digital TDR; Up to 2km; Library of std cable types; Measures open/short distances.
Fiber blowing machine for FTTH fibers (EFBU) and micro cables up to 6.5 mm. Compatible with OptiCloud, the MicroFlow LOG is making work easier for network owners, contractors and installers. Fiber/Cable OD: 0.8-6.5 mm; Duct size OD: 4-16 mm; Preparation time: 5 min; Blowing distance (with air): Up to 2500 m.
Fiber blowing machine for FTTH fibers (EFBU) and micro cables up to 6.5 mm. Fully automatic fiber blowing machine that secures fast and reliable optical fiber blowing. Designed for air blown fiber and small fiber optic cables. Fiber/Cable OD: 0.8-6.5 mm; Duct size OD: 4-16 mm; Preparation time: 5 min; Blowing distance (with air): Up to 2500 m.
Cable blowing machine for access network. Hydraulic cable blowing machine with a built-in electronic counter and cable damage safety monitoring system. Fiber/Cable OD: 3-12 mm; Duct size OD: 7-20 mm; Preparation time: 4 min; Blowing distance (with air): Up to 3500 m.
Cable blowing machine for backbone. Optimal for relining. The MultiFlow is designed for relining of multiple micro ducts, but it can also be operated for single cables. Fiber/Cable OD: 5.5-32 mm; Duct size OD: 10-63 mm; Preparation time: 8-10 min; Blowing distance (with air): Up to 5000 m; Floating distance (with water): Up to 10000 m.
Fiber blowing machine for FTTH fibers (EFBU) and micro cables up to 4.5 mm. Small but powerful fiber blowing machine, which can blow both blown fibre (EPFU) and micro/nano cables. Tested in accordance to IEC standards. Fiber/Cable OD: 0.8-4.5 mm; Duct size OD: 3.0-12.7 mm; Preparation time: 3 min; Blowing distance: Up to 1200 m.
Cable blowing machine for backbone with RAPID features. The PowerFlow is easy to operate and designed for rough conditions. This hydraulic machine can blow a large variety of cables, fibers and ducts. Fiber/Cable OD: 5.5-25 mm; Duct size OD: 10-63 mm; Preparation time: 8-10 min; Blowing distance (with air): Up to 5.000 m; Floating distance (with water): Up to 10.000 m.
The LanCaster is a professional Structured Cabling Tester and Trouble Shooter designed to speed up the on-site testing of data and voice networks, and the production testing of cable assemblies. The LanCaster identifies all common faults, including split pairs, on wiring schemes installed to TIA568 A/B, USOC and ISDN standards. In addition to this the LanCaster can inform the user which end of the installed link contains certain types of fault, enabling...
The NEW Lancaster Pro-ST is a low cost wire map tester which tests and certifies structured cabling continuity to a TIA568A/B , USOC and ISDN standards. The new Lancaster Pro-ST displays on screen wiring configurations showing the length of all 4 pairs and length of pair to fault up to 150m (500ft). Structured Cable tester; Up to 90m; Deadzone 3m; USB interface.
Pipe transmitter with diameter 6.4 mm and frequency 32.768 kHz. Thread M5 (Female)
Pipe transmitter with diameter 7.5 mm and frequency 32.768 kHz. Thread M5 (Female)
Pipe transmitter with diameter 7.5 mm and frequency 32.768 kHz. Thread M6 (Female)
Pipe transmitter with diameter 6.4 mm and frequency 32.768 kHz. Thread M5 (Female)
Pipe transmitter with diameter 9 mm and frequency 32.768 kHz. Thread M5 (Female)