Amplifying inductive rod probe SA10 Vaata suuremalt

Amplifying inductive rod probe SA10 (10kHz)

SA10

Uus toode

SA10 is a 10kHz tuned amplifying inductive rod probe that is used with XTR25 or KXR15 receivers for cable tracing when the tracing distance is more than 20cm, like with underground cables.

SA10 is used in the same way as ordinary SA1 but the tuned construction increases its sensitivity considerably compared to SA1. SA10 is used also when XT25 and KX15 wire tracers are used for locating the Pipe Transmitter PL-10.

SA10 dimensions are 155mm x 20mm and it has grey color to distinguish it from other rod probes.

Compatible devices: XTR25, KXR15 and XTR10. With other Vesala cable tracers, like CTR45 and WTR20, SA1 probe must be used instead.

 

0.2 kg
)

Lisa soovinimekirja

Ühendused BNC
Mõõdud 155mm x 20mm
Sagedus 10 kHz

Hetkel pole ühtegi ülevaadet

Kirjutage oma ülevaade

Amplifying inductive rod probe SA10 (10kHz)

Amplifying inductive rod probe SA10 (10kHz)

SA10 is a 10kHz tuned amplifying inductive rod probe that is used with XTR25 or KXR15 receivers for cable tracing when the tracing distance is more than 20cm, like with underground cables.

SA10 is used in the same way as ordinary SA1 but the tuned construction increases its sensitivity considerably compared to SA1. SA10 is used also when XT25 and KX15 wire tracers are used for locating the Pipe Transmitter PL-10.

SA10 dimensions are 155mm x 20mm and it has grey color to distinguish it from other rod probes.

Compatible devices: XTR25, KXR15 and XTR10. With other Vesala cable tracers, like CTR45 and WTR20, SA1 probe must be used instead.

Samas kategoorias on veel 29 toodet :