PL18 is a small pipe transmitter sonde which is an efficient accessory for the Vesala CL43 Compact Locator and other Vesala cable tracers using the 512kHz (PL18-05) or 33kHz (PL18-33) tracing frequency.
Hoiatus: Viimane toode laos
PL18 is a small pipe transmitter sonde which is an efficient accessory for the Vesala CL43 Compact Locator and other Vesala cable tracers using the 10kHz (PL18-10) or 33kHz (PL18-33) tracing frequency.
Using a pipe transmitter sonde
PL18 powers on when the battery compartment is turned to the transmitter section. Sonde is attached to the push rod (snake) with the M12 threaded sleeve of the battery compartment or with tape. After that the sonde is pushed into the target pipe using the push rod.
To avoid loosing signal e.g. at corners the sonde is traced with a cable tracer receiver along as it moves ahead. If sonde hits an obstacle or blockage, it´s possible to define the location and depth very accurately, which reduces unnecessary digging.
PL18 has a red power-on LED at the side of the sonde. LED goes off if battery is weak. PL18 diameter is 18.2mm and length with standard battery compartment 98mm.
|Mõõdud||Length: 98 mm|
|Sagedus||512Hz (PL18-05); 33kHz (P18-33)|
|Transmitter appliance class||IP68 / IK08|
|Saatja tööaeg||8h (PL18-05); 20h (PL18-33)|
|Töökaugus vaba õhus||5.3m (PL18-05); 10m (PL18-33)|
|Töökaugus metalltorus||3.5m (PL18-05)|
CL43 Compact Locator is an affordable and easy-to-use wire and cable and duct sonde locator. Outdoors CL43 can be used to trace and pinpoint underground cables from several metres depth. Indoors CL43 can be used to locate for example floor heating cables and wires inside walls.
Battery compartment PL18-M10M with M10 male mounting thread for PL18 duct sondes
Hetkel pole ühtegi ülevaadet
|1. Saatja PL18-10, PL18-33 või PL18-05, 1 tk|
|2. Patareipesa M2 keerega, 1 tk.|
|3. Hoiukarp, 1 tk.|
|4. Kasutusjuhend Inglise, Soome, Rootsi või Vene keeles, 1 tk.|
|5. Patarei, 1 tk.|
|Saatjat torude jaoks tehniline kirjeldus||Inglise keel||1805||Duct sondes, EN|