Saatja torude jaoks MPL7

Uus toode

MPL7 is flexible and only 7mm diameter transmitter sonde for tracing microduct and other tube blockages. It is very useful when new cables are to be pushed into old ducts, which already have installed cables or other obstacles. MPL7-10 is compatible with Vesala’s 10kHz wire and cable tracers.

Rohkem infot

 

0.071 kg
)

Lisa soovinimekirja

MPL7 is flexible and only 7mm diameter transmitter sonde for tracing microduct and other tube blockages. It is very useful when new cables are to be pushed into old ducts, which already have installed cables or other obstacles. MPL7-10 is compatible with Vesala’s 10kHz wire and cable tracers.

The MPL7-10 construction includes the transmitter unit and battery compartment, which are connected together. The semi-rigid construction helps the device pass tube curves, joints and obstacles easily. This way constructor can validate if ducts are usable for new cables or not. MPL7 is intended for ducts having inner diameter of 10mm or more.

Working with MPL7

MPL7 turns on and starts sending tracing signal when a battery is inserted and the battery compartment is turned to the middle part. The sonde is attached to the tip of a push rod (snake) by its M6 female thread, located at the end of the battery compartment. Alternatively the sonde can be taped to the side of the push rod to reduce risk of damage.

After that the sonde is pushed into the duct. If there is a blockage in the duct, its location can be roughly estimated using the length of the rod and cable & duct maps. After that the exact location of MPL7-10 is traced in the area above ground with a cable tracer receiver. Knowing the exact spot of a blockage considerably saves time and reduces unnecessary digging costs.

There is a blinking red light at the tip of the transmitter indicating transmitter operation. The disposable lithium battery unit gives energy for approx. 9 hours total usage.

MPL7 diameter is 7.5mm and length with mounted battery compartment 114mm.

Mõõdud Length 114 mm
Läbimõõt 7.5 mm
Sagedus MPL7-10 (10kHz), MPL7-33 (33kHz)
Transmitter appliance class IP67 / IK07
Saatja patareid CR535
Saatja tööaeg 9 h
Töökaugus vaba õhus MPL7-10 - 3.3m; MPL7-33 - 5.1m
Töökaugus metalltorus 0 m
  • CL43 Compact Locator is an affordable and easy-to-use wire and cable and duct sonde locator. Outdoors CL43 can be used to trace and pinpoint underground cables from several metres depth. Indoors CL43 can be used to locate for example floor heating cables and wires inside walls.

  • Battery compartment MPL7-M5 with M5 mounting thread for MPL7 duct sondes

Hetkel pole ühtegi ülevaadet

Kirjutage oma ülevaade

Saatja torude jaoks MPL7

Saatja torude jaoks MPL7

MPL7 is flexible and only 7mm diameter transmitter sonde for tracing microduct and other tube blockages. It is very useful when new cables are to be pushed into old ducts, which already have installed cables or other obstacles. MPL7-10 is compatible with Vesala’s 10kHz wire and cable tracers.

MPL7 Põhikomplekt

1. Saatja MPL7-10 või MPL7-33, 1 tk.
2. Patareipesa M6 keerega, 1 tk.
3. Tasku suur plastkarp, 1 tk.
4. Kasutusjuhend Inglise, Soome, Rotsi või Vene keeles, 1 tk.
5. Patareid, 2 tk.

Video esitlus


 

Kirjeldus Keel Ver. Link
Saatjat torude jaoks tehniline kirjeldus Inglise keel 1805 Duct sondes, EN

Samas kategoorias on veel 12 toodet :