Duct sonde PL18-05 (18mm, 512Hz)

PL18-05

New product

PL18-05 is a low frequency (512Hz) pipe transmitter sonde, which enables tracing of underground cast iron ducts and their blockages. Also stainless steel ducts commonly used in industry can be followed and checked with PL18-05.

More details

 

0.2 kg

Add to wishlist

PL18-05 is a low frequency (512Hz) pipe transmitter sonde, which enables tracing of underground cast iron ducts and their blockages. Also stainless steel ducts commonly used in industry can be followed and checked with PL18-05.

PL18-05 powers on when the battery compartment is turned to the transmitter section. Red power-on LED at the tip of the sonde indicates operation. If LED goes off, battery is weak. Sonde is attached to the push rod (snake) with the M12 threaded sleeve or with tape. After that the sonde is pushed into the target duct using the push rod.

All PL18-series sondes can be mounted to a variety of push rods. Standard mounting is for rods with M12 male thread. With the PL18-FM flexible mounting accessory also M6 rods can be used and the PL-MSA accessory enables M5 and M10 rods.

To avoid loosing signal e.g. at corners the sonde is traced with a cable tracer receiver along as it moves ahead. If sonde hits an obstacle or blockage, it’s possible to define the location and depth very accurately, which reduces unnecessary digging.

PL18-05 diameter is 18.2mm and length with standard battery compartment is 110mm. Transmitted signal is continuous 512Hz.

Dimensions Length: 110 mm
Diameter 18 mm
Frequency 512 Hz
Transmitter appliance class IP68 / IK08
Transmitter operating time 8h
Range in open air 5.3m
Range in cast iron duct 3.5m

No customer reviews for the moment.

Write a review

Duct sonde PL18-05 (18mm, 512Hz)

Duct sonde PL18-05 (18mm, 512Hz)

PL18-05 is a low frequency (512Hz) pipe transmitter sonde, which enables tracing of underground cast iron ducts and their blockages. Also stainless steel ducts commonly used in industry can be followed and checked with PL18-05.

Description Language Ver. Link
Duct sondes technical description English 1805 Duct sondes, EN

PL18 Basic set

1. Transmitter PL18-10, PL18-33 or PL18-05, 1 psc.
2. Battery compartment with M2 mounting, 1 pcs.
3. Storage box, 1 psc.
4. Users manual in English, Finnish, Swedish or Russian, 1 psc.
5. Battery, 1 pcs.

Video demonstration


 

6 other products in the same category: