Duct sonde MPL6 (6.4 mm, 33kHz)

MPL6

New product

MPL6 is micro-sized transmitter sonde for tracing microduct and other tube blockages. It has only 6.4mm diameter so it fit into ducts having inner diameter of 8mm or more.

More details

 

0.063 kg

Add to wishlist

MPL6 is micro-sized transmitter sonde for tracing microduct and other tube blockages. It has only 6.4mm diameter so it fit into ducts having inner diameter of 8 mm or more.

MPL6 construction includes the transmitter unit and battery compartment, which are connected together with a semi-rigid middle part. The shape of the transmitter and the unique construction help the sonde pass tube curves and joints easily.

Working with MPL6

MPL6 turns on and starts sending tracing signal when a battery is inserted and the battery compartment is turned to the middle part. The sonde is attached to the tip of a push rod by its M5 female thread, located at the end of the battery compartment. Alternatively the sonde can be taped to the side of the push rod to reduce risk of damage. Sonde can also be attached to the tip of an optical cable, after which the sonde is jetted into a microduct together with the cable.

If there is a blockage in the microduct, its location can be roughly estimated using the jetted cable or rod length and cable & duct maps. After that the exact location of MPL6-10 is traced in the area above ground with a cable tracer receiver. Knowing the exact spot of a blockage considerably saves time and reduces unnecessary digging costs.

Other usage and batteries

Both the transmitter unit and the battery unit are watertight enabling underwater use. There is a blinking red light at the tip of the transmitter indicating transmitter operation. Lithium battery gives approx. 9 hours total usage time depending on ambient temperature.

Dimensions 6.4x84 mm
Diameter 6.4 mm
Frequency 33 kHz
Transmitter appliance class IP67 / IK03
Transmitter operating time 9 h
Range in open air 2.3 m
Range in cast iron duct 0 m

No customer reviews for the moment.

Write a review

Duct sonde MPL6 (6.4 mm, 33kHz)

Duct sonde MPL6 (6.4 mm, 33kHz)

MPL6 is micro-sized transmitter sonde for tracing microduct and other tube blockages. It has only 6.4mm diameter so it fit into ducts having inner diameter of 8mm or more.

Description Language Ver. Link
Duct sondes technical description English 1805 Duct sondes, EN

MPL6 Basic set

1. Transmitter MPL6-10 or MPL6-33, 1 psc.
2. Pocket-size plastic box, 1 psc.
3. Users manual in English, Finnish, Swedish or Russian, 1 psc.
4. Batteries, 2 pcs.

Video demonstration


 

6 other products in the same category: